Independent temperature monitoring for fridges and cold roomsWhen the cold fails at night, who finds out?

A second reading on its own path, with alerts by SMS, call or e-mail depending on the pack. Not wired to your refrigeration, and unable to act on it.

Mobile network

ARES12 LTE set

Monitor with 3 m probe, antenna and mains adapter. SMS, call or e-mail, no portal needed. Battery for about 24 h. You supply the SIM card.

€587.70 excl. VAT€705.24 incl. VAT

See the pack Request a quote

The moments when nobody is there

Refrigeration rarely chooses office hours. These are the situations the packs are built for.

Saturday night
An SMS or call reaches you while there is still time to act.
Find out more
A power cut
The ARES has a battery for about 24 h. The LoRaWAN gateway can hold on with its backup battery option.
Find out more
A door left ajar
You set the limit and the delay, so that a normal defrost does not raise an alert.
Find out more
A controller you can no longer trust
The second reading comes from a separate probe, on another path.
Find out more

Five packs, one job

Pick by how the alert leaves your site. Prices excluding VAT, every pack can also be quoted.

Full comparison

How it works

A separate probe
The probe measures inside the cold space, with no link to your refrigeration control.
Its own path
The reading leaves by mobile network, NB-IoT, LoRaWAN or your site network, depending on the pack.
Someone is warned
By SMS, call, e-mail or push depending on the pack, when a reading leaves the limits you set.

Watches the cold. Touches nothing.

Our devices are connected neither to the controller nor to the refrigeration circuit. They measure and warn. They cannot send a setpoint to your refrigeration.

Why independent monitoring

This system monitors and warns. It does not regulate and does not replace your installation's probe. On its own it does not amount to HACCP, EN 12830 or GDP compliance: your control plan remains yours. An alert needs mobile network or Internet, power, and someone to receive it. Test it at installation.